Certification Record

• THE FOLLOWING FUSEHOLDER ASSEMBLIES HAVE BEEN EXAMINED IN ACCORDANCE WITH ELECTRICAL CERTIFICATION NOTICE 552:
• FUSEHOLDERS TO CLASS CC, G, H, J, R and T HAVE BEEN EXAMINED FOR "MARKINGS" IN ACCORDANCE WITH CSA INTERNATIONAL CERTIFICATION NOTICE "N07-094".
• CARTRIDGE TYPE, FOR USE WITH STANDARD CODE FUSES:
• Cat Series, F30A, 30A and less; F60A, 60A and less; F100A, 100A and less; F200A, 200A and less; F400A, 400A and less; F600A, 600A and less; 250V ac or 600V ac and less, 1-, 2-, 3-pole.
• Part Nos 4100301 to 4100309, 60A and less, 250V ac and less; 4100310 to 4100312, 4100319 to 4100321, 30A and less, 600V ac and less; 4100337 to 4100342, 60A and less; 600V ac and less, 1-, 2-, 3-pole.
• Series 47, 48, 49; 2 to 6 poles, each pole 30 or 60A and less; 1-, 2-, 3- multiple pole, 205A and less, 2 to 6, 60A and 30A branches per pole.
• Series H2, H3, H4, H5 and H6, 2 to 6 poles, 250V, 60A max or 30A max per pole.
• CARTRIDGE TYPE, FOR USE WITH CLASS T DIMENSION FUSES:
• Cat Series, T30A, 30A and less; T60A, 60A and less, 300V ac and less, 2 to 6 pole; 6T30A, 30A and less, 6T60A, 60A and less, 600V ac and less, 2 to 4 pole; T100A 100A and less, T200A 200A and less, 300V ac or 600V ac and less, 1 or 3 pole; T400A 400A and less, T600A 600A and less, 300V ac or 600V ac and less, 1-pole.
• Auxiliary busbars, Cat Nos 9767802 and 9767803 intended for use with 2 and 3 pole Class T fuseholders rated 30 and 60A.
• CARTRIDGE TYPE, FOR USE WITH CLASS R DIMENSION FUSES:
• Cat Series, R30A, 30A and less; R60A, 60A and less; R100A, 100A and less; 250V ac, 1 to 3-pole.
• Cat Series R100AXB, 100A and less, 250V ac and less, 1, 2 or 3-pole.
• Cat Series 6R100AXB, 100A and less, 600V ac and less, 1, 2 or 3-pole.
• Cat Series, R200A, 200A and less; R400A, R400A1BE, R400A3BE, 6R400A1BE, 6R400A3BE, 400A and less; R600A, 600A and less; 250V ac or 600V ac and less, 1- or 3-pole.
• Cat Series 6R30A, 30A and less, 600V ac and less, 1, 2 or 3-pole.
• CARTRIDGE TYPE, FOR USE WITH CLASS J DIMENSION FUSES:
• Cat Series, 6J30A, 30A and less; 6J60A, 60A and less; 600V ac and less, 1 to 3 pole.
• Cat No 6J100A, 100A, 600V ac, 1 to 3 pole.
• Cat No 6J200A1B, 1 pole, 6J200A3B, 3 pole, 200A and less, 600V and less.
• Cat No 6J400A1B, 6J400A3B, 400A and less, 600V ac and less, 1 or 3 pole.
• MINIATURE CARTRIDGE TYPE, FOR USE WITH 13/32 IN DIA BY 1-1/2 IN LONG FUSES:
• Cat Series, 6M30A, 30A and less, 600V ac and less, 1 to 3 poles.
• Sectional type, for channel or flat mounting, Cat No 6W30A1-F, 6W30A1-C, 6B30A1-F, 6B30A1-C, 6WE-F, 6WE-C, 6BE-F and 6BE-C, 30A and less, 600V ac and less, for use with stranded copper wire only.
• CARTRIDGE TYPE, FOR USE WITH CLASS HRCI-MISC FUSES:
• Cat Series 6F30A, 30A and less, 600V ac and less, 1, 2 or 3-pole.
• Cat Series F100AXB, 100A and less, 250V ac and less, 1, 2 or 3-pole.
• Cat Series 6F100AXB, 100A and less, 600V ac and less, 1, 2 or 3-pole.
• Cat Series F400A1BE, F400A3BE, 6F400A1BE, 6F400A3BE, 400A and less, 600V ac and less, 1 or 3 pole.
• Cat Series 6CC30A, 30A and less, 600V ac and less, 1, 2 or 3-pole.
• CARTRIDGE TYPE, FOR USE WITH COMBINATION OF 13/32 IN DIA BY 1-1/2 IN LONG FUSES AND/OR HRC1-MISC FUSES:
• Cat Series 6CCM30A, 30A and less, 600V ac and less, 2- and 3-pole.
• CARTRIDGE TYPE, FOR USE WITH CLASS HRCII-C FUSES:
• Cat Nos 6C30A1B and 6C30A3B, 30A, 600V ac and less, 1 and 3-pole respectively.
• Cat Nos 6C60A1B and 6C60A3B, 60A, 600V ac and less, 1 and 3-pole respectively.

Notes:

1. The Series 47, 48 and 6M30A fuseholder designations are followed by suffix numbers denoting number of poles, bussing arrangement, line and load connections and special modifications e.g. 4964504.
2. Reinforcing spring is standard on all fuseholders for Class R dimension fuses except R600A and 6R600A.
3. A prefix "R" when added to cat no designates provision of fuse clip assemblies with reinforcing springs; conversely, prefix "U" when added to Cat No denotes an unreinforced fuse clip assembly, without reinforcing springs.
4. For Cat Series F, T, R, J;

• A prefix "6" when added to Cat No designates 600V ac rating.
• A Suffix "1-6" when added to Cat No designates number of poles.
• Suffix letter(s) denoting type of wire connector appear(s) after each designation as follows:
• "S" signifies a screw terminal for use with spade or ring type wire connectors, copper only, or wire binding head screw.
• "SP" signifies a "SEMS" pressure screw.
• "B" signifies a box type pressure connector (aluminum
• "BCU" signifies a box type pressure connector (copper).
• "BD" signifies box/distribution wire connector.
• "BP" signifies a box type pressure connector and paralleling bus for F30A Series, Cu/Al.
• "Q" signifies 1, 2 or 4 quick-connect type terminals.
• "SQ" signifies a wire binding screw with 2 quick-connect terminals.
• "SPQ" signifies a "SEMS" pressure screw with 2 quick-connect terminals.
• These fuseholders are Certified as components for use only in other Certified equipment where the suitability of the combination is to be determined by the Canadian Standards Association.
• Cartridge fuseholder, Cat Nos G15A, G20A or G30A with suffixes, for use with  Class G fuses, 1, 2, or 3-poles, 15A and , 20Arated 600V c max and 30A rated 480V ac man.
• Cat Series R6CC60A, 1, 2 or 3 pole, 60A and less, 600V ac and less; fuseholders for use with Littelfuse Type CCMR Component Accepted fuses, 35-60A.
• Fuseholder assemblies, accessory fuse cover and fuse cover/puller intended for use with submittors Certified fuseholders and Certified fuses as listed below:

Notes:

1. Suffixes are added to the above catalogue series designations to denote number of poles and type of termination.
2. Thse fuseholders are Certified, as components, for use only in other Certified equipment where the suitability of the combination is to be determined by the CSA International.

/mer